Jet pumps for de-acidification of potable water.Jet pumps for pressurised dissolved air flotation.Waste gas cleaning and environmental technology.non-metallic vacuum systems (Graphite, PTFE). The term jet ejector describes a device in which a pumping effect is achieved using a motive fluid. A jet ejector requires no mechanical drive and has no moving parts. This basic principle applies to every jet ejector in different models and ranges of application.

The application determines the design of the flow section.Ī steam jet ejector is illustrated below as example (steam serves as motive fluid to create vacuum).

The function depends, above all, on the design of the motive nozzle (2) and of the diffuser (4 + 5). The motive fluid passes successively through these two components. The flow section will change along this path. The pressure in the motive nozzle (2) decreases and the velocity rises. Conversely, the flow is decelerated in the diffuser (4 + 5) while its pressure increases to the discharge pressure at the outlet of the jet ejector. The section between motive nozzle (2) and diffuser (4 + 5) has the lowest static pressure, approximately equivalent to the suction pressure p s. At this point the suction flow enters into the ejector head (3) through the suction connection B and is mixed with the motive fluid flowing with high velocity. Motive flow and suction flow pass together - as a mixture - through the diffuser, loosing velocity and Part of the kinetic energy is transferred to the suction flow. The increase from suction pressure ps to discharge pressure p d corresponds to the delivery head for the suction flow or to the pressure difference of the jet ejector. The ratio p d / p s is the compression ratio of a jet ejector. Ln a jet ejector the static pressure energy of the motive flow which cannot be directly transferred is thus converted into kinetic energy. This kinetic energy can be released to the suction flow by impulse transfer while both flows mingle. The diffuser converts the kinetic energy of the mixture consisting of motive flow and suction flow back into static pressure energy. Ln the steam jet vacuum ejector illustrated below, the critical pressure ratio is exceeded in the motive nozzle (2) (this can be recognized by the expansion of the nozzle cross-section downstream the minimum throat diameter.) The steam velocity exceeds the sonic velocity accordingly.

Ejector design calculation